All-in-one 3.5" LCD Monitor
CCTV Camera PTZ Test Tester
The
CCTV testerPRO� JE-T894 is developed for the On-Site installation and
maintenance of video monitoring system. It can be used for displaying video, testing
video signal, controlling PTZ, searching the PTZ device ID address, generating
images, capturing data of RS485 and testing LAN cable etc. With it, you can do easy
and simply on installing and maintaining the CCTV system, it also will improve work
efficiency and get the labor cost down.
|
|
|
1, Video Test
|
2, PTZ controller
|
3, Video signal Level Test
|
4, Color bar Generator
|
|
|
|
|
3.5" 960(H) X 240(V) high resolution TFT LCD screen, display
video input signal
|
As a controller, it possess
full function to Control the PTZ camera, configure PTZ parameter: protocol, baud
rate and ID address, pan/tilt speed, setup and call preset position
|
Adjust LCD
Brightness, Contrast, Color saturation, Video Format and Video level
testing. |
Output or
receive standard color bar signal, testing monitor, cable or other
equipment. |
5, UTP Cable test |
6, RS485 Data
Monitor |
7, Address search |
8, Digital multimeter |
|
|
|
|
Test LAN or telephone
cable. the connecting condition and sequence of wires will be displayed, as well as
the serial number of the cable tester kit. |
Capture the protocol from the controlling system and display
the command and data. |
Search The PTZ camera ID |
Digital Multimeter performs AC/DC Voltage, AC/DC Current, Resistance,
Continuity, Capacitance and Diode test, Auto/ Manual Range, Data hold, Relative
measuring |
9, Audio Test
|
10, DC12V 1A Output
|
|
It built-in speaker for audio test |
|
Power the camera with DC12V(1A) power output from the tester. It is
helpful for demo and testing where there is no power supply available |
|
|
CCTV TesterPRO |
Video Test |
Signal
mode |
PAL/ NTSC auto adapt |
Display |
3.5 inch digital
TFT LCD, 960 X 240 resolution |
LCD adjustment |
Brightness, Contrast, Saturation
adjustable |
Video In/ Out |
1CH BNC input & 1CH BNC output |
Video output mode |
1.0Vp-p |
Video Level
Test |
Level Test |
Video signals measured in IRE or
mV |
PTZ
Controller |
Communication |
RS232, RS422 simplex and
RS485 |
Protocol |
Compatible with more then 20 protocls such as Pelco D/P, Samsung,
Panasonic, Lilin, Yaan... etc. |
Baud
Rate |
150, 300,
600,1200,2400, 4800, 9600, 18200bps
|
Video Signal
Generation |
Color bar generation |
Output one channel PAL/NTSC color bar video signal for
test monitor or video cable
|
UTP cable test |
UTP cable test |
Test UTP cable connection
status and display in the screen, Read the number of the test box
|
DC Power
Output |
DC power output |
Output DC12v 1A power for the camera
|
Audio
Test |
Audio test |
Test the pickup and other audio equipments on the front-end
|
RS485
data analyst |
Data Monitor |
Captures and analyzes the command data from controller
device
|
Power |
Power Adapter |
AC110~240V/ DC12V 2A
|
Battery |
Built in 3.7V ,3000mAH Li-ion batteries
|
Rechargeable |
After charging 3-4 hours, working time lasts 12 hours
|
General |
Working Temperature |
-10 ~ +50
|
working
Humidity |
30 ~ 90%
|
Dimension/ Weight |
176mm X 94mm X 36mm /340g
|
Digital
Multimeter |
Counts: -6600 ~ +6600, Conversion rate: 3 times/s, Current modes for
clamp meter with ZERO function |
DC Voltage |
Rang |
Accuracy |
Resolution |
660mV (manual range) |
+- (0.3%+4)
|
0.1mV |
6.6V |
1mV |
66V |
10mV |
660V |
100mV |
AC Voltage |
Rang |
Accuracy |
Resolution |
660mV (manual range) |
+- (1.5%+6) |
0.1mV |
6.6V |
+- (0.8%+6) |
1mV |
66V |
10mV |
660V |
100mV |
DC/ AC Current |
Rang |
Accuracy |
Resolution |
6.6mA |
+- (0.5%+3) |
1uA |
66mA |
10uA |
660mA |
100uA |
10A |
+- (1%+5) |
10mA |
Resistance |
Rang |
Accuracy |
Resolution |
660 |
+- (0.8%+3) |
0.1 |
6.6K |
+- (0.8%+2) |
1 |
66K |
10 |
660K |
100 |
6.6M |
1K |
66M
|
+- (1.2%+5) |
10k |
Continuity |
Rang |
Function |
))) |
Built-in buzzer will be sound, if resistance is
low than 50 |
Diode |
Resolution |
Function |
1mV |
Display: read approximate forward voltage of
diode |
Capacitance |
Rang |
Accuracy |
Resolution |
6.6nF |
+- (0.5%+20) |
1pF |
66nF |
+- (3.5%+8) |
10pF |
660nF |
100pF |
6.6F |
1nF |
66F |
10nF |
660F |
+- (5%+8) |
100nF |
6.6mF |
1f |
66mF |
10F |
|
Video cable
|
1pc
|
RS485 cable |
1pc |
DC Output cable |
1pc |
Multimeter cable |
2pcs |
Audio cable |
1pc |
LAN cable test |
1pc |
Rechargeable Li-ion
batteries |
1pc |
safety belt |
1pc |
Robber housing |
1pc |
Tester (Model: JE-T894) |
1pc |
|
|
|